WinPwn 2.0 – Pwnagetool 2.0
Finally there it is. Our official Winpwn 2.0 or Pwnage tool 2.0 jailbreak guide. If it’s the jailbreak Iphone 2.0 development that seems like rocket science to you, help is here. Initial troubles handling the WinPwn was inevitable, but at the end all’s well that ends well. So if you are looking for the important files and system needs to get on with the Pwnage process, there’s some much needed prerequisites posted to make the process easier than you thought.
Prior to starting out, you should know that the iPhone 3G has not yet been unlocked. Es, you heard that right. Truth is the Pwnage process will not unlock your 3G iPhone, doesn’t matter how much effort you put into it. Here’s the fine print, this system will help you jailbreaking but certainly not unlock it. Nevertheless it will open up your Iphone for other providers.
Before we start to jailbreak your Iphone 3g or 2.0 you first read the following:
System requirements you’ll need:
- Windows XP or Windows Vista
- .NET Framework 2.0 or later iTunes 7.7
- In case you are updating from iTunes 7.5, do restart your computer right away and then continue.
Files you’ll need to download first need:
- WinPwn 2.0 at RapidShare.com.
- iPhone1,1_2.0_5A347_Restore.ipsw
- 2.0 firmware Bootloader 3.9
- Bootloader 4.6
For everybody how doesn’t have the patience to read out the complete Jailbreak 2.0 guide we made a short overview. Check this quick and easy 2.0 guide:
- For starters, download WinPwn
- Let’s say you already have it installed, then open winpwn.exe
- It’ll creat a shortcut on your desktop, look for the icon
- To ease the situation, create an “iphone” folder on your desktop.
- Save your files here(bootloaders, 2.0 firmware, and the winpwn 2.0 zip file)
This saves you the confusion of selecting files, browsing, etc.
If you see an image like the above, it’s your WinPwn 2.0 version. The guidance from here on is to get your iPhone Pwned(new term) and load it with a custom 2.0 firmware. This was possible with the 1st generation iPhone. This made it possible to unlock 2.0 with the 3.9 bootloader. Do remember, that this has not unlocked the 3G iPhone.
You need to click the first button prompting Browse .ipsw. It should be simpler if you made that desktop folder. Put the 2.0 firmware downloaded from the needed files list in the same desktop folder.
Next you need select iPhone1,1_2.0_5A347_Restore.ipsw from the list. Just double click it or tap the open button. After selecting the firmware, there’ll be some more text in the output. This is just a prompt notifying you that the firmware has been loaded on to winpwn.
Enter the OK button. Now enter the IPSW Builder button. Do not touch the options provided at the bottom.
Now the IPSW Builder will show up. Use Cydia, the packaging system that allows you to download applications to your phone, this is similar to Installer. This has a strong backend and great prospect. By the way it’s the only option, so go for it, takes a while, so get some coffee.
Once you click the iPwner key, it makes the required changes. It probably does so to make it possible for you to restore your custom firmware that’s created at the end. Well, that’s the whole idea anyways.
iTunes has been Pwned!
So now we’re underway. It’s the start, iTunes has been modified, but it surely is needed later. That was easy, so now onto the custom images.
We used some default custom images but of course you can browse the online feature and choose from the cool boot logos.
Smooth going so far. Let’s leave the Custom Payload tab and move to Advanced.
Feeling a little grounded yet? It would have been easier if you had downloaded the needed files at the start of the tutorial. It’s easy. If they’re in your iphone folder, click the relevant button and choose the correct Bootloader. It’s easy, choose a BL-39.bin for the Bootloader 3.9 file.
When this is sorted, it’s time to be on the go. So you either see a red or a green, and the green means you’re raring to go.
Next step: Build .ipsw, this too should already be in your precious iphone folder.

So now, you’ve created a custom firmware. You obviously are ready to load it. It’s almost going to be over really soon.
Now your device needs to be in DFU mode. Don’t get into the technicalities, just select the mode.
- Turn the phone off
- We mean off for real
- Alongside, push the home and power buttons
- After 10 seconds, release the power button
- Keep holding the home button till iTunes recognizes the phone
- The process should take 7 seconds, at the most 10. In case you overshot your time, start again by switching the phone on and then off again.
- The iPhone screen will be blank
- It will even look like it’s still turned off
- When iTunes recognizes it – you’re in DFU mode
You are DONE Jailbreaking your new Iphone 3g, Iphone 2.0 or Ipod Touch 2.0. Now enjoy!
3 Responses to “WinPwn 2.0 – Pwnagetool 2.0”
Share your Thoughts!
"Apple Iphone Unlock Instruction Videos"
Jailbreak and Unlock your Iphone with UltraSn0w
Fastest way to unlock and jailbreak your iPhone 3G, 3GS to any sim card
for NEW 3.0 Firmware.
JAILBREAKING OR UNLOCKING YOUR IPHONE IS AT OWN RISK!
1) First Step jailbreak your iPhone 3G or 3GS on NEW 3.o Firmware. Check
instructions on our site
2) Now add this source to Cydia or Icy
http://repo666.ultrasn0w.com
3) Insert your simcard and turn your iPhone 3G or 3GS off then back wait a few
secs and you will have signal.
Jailbreak your Iphone with Redsn0w
Compatible with:
- iPod Touch 1G
- iPod Touch 2G (yup!)
- iPhone 2G (will unlock)
- iPhone 3G (will only jailbreak, ultrasn0w unlock in cydia)
- iPhone 3GS (will only jailbreak, ultrasn0w unlock in cydia)
REDSN0W DOWNLOADS:
- Firmwares (Look carefully, download the right one) :
http://659ef965.thesefiles.com - REDSN0W WINDOWS (0.8 Now supports 3GS) :
http://e404b3f9.thesefiles.com OR
http://www.cuthut.com/BOW - REDSN0W MAC (0.8 Now supports 3GS) :
http://tinyurl.com/la46ge OR
http://cuthut.com/BOS - Bootloader files for iPhone 2G :
http://7f1523a6.thesefiles.com OR
http://www.box.net/shared/y66shprf02
Jailbreak & Unlock Iphone 3G
- Convert video/dvd to Iphone
- General Iphone
- Iphone 3G
- Iphone 3GS
- Iphone Games & Apps
- Iphone Hack & Crack
- Iphone Tips & Tricks
- Iphone Unlock Software
- Iphone Wallpapers
Apple Iphone 3GS, 3G, 2G, 3.0, 3.01, 3.1.2
- Jailbreak Iphone 3GS with Redsn0w 0.8 (Windows)
- Jailbreak your Iphone 3GS 3.0 with Purplera1n
- Guide: Get your signed iBEC & iBSS for Iphone 3GS
- Guide – Unlock Iphone 3GS 3.0 with Ultrasn0w
- Hackers cracked Simlock iPhone 3G with Yellowsn0w
- Apple iPhone 3G
- The OpenFrame Home Phone iPhone Clone
- What to Know Before Buying a Iphone 3G In India – Price, Buying Guide,All
- iPhone 3G released in India
- WinPwn 2.0 – Pwnagetool 2.0
- Jailbreak 2.0 Pwnagetool 2.0 Released – Unlock Iphone 3g
- Unlock Iphone 3g, why not?
- Jailbreak iPhone/iPod Touch 1.1.4
- How-To Jailbreak 2.0 (MAC ONLY)
- Fancy Sexy Apple Iphone
- Iphone Wallpapers
- iPhone vs. iPod Touch
- Superseding The iPhone
- Make The Most Of Your iPhone
- Free Iphone unlock vs. Paid unlock
- Apple Iphone Overview
- Overview Iphone Unlock Software
- Iphone Unlock Dictionary & Terms
- Unlock & Prevent iPhone Being Hacked
- iPhone Must Know Secrets
- Secrets of your iPhone Keyboard
- Install Iphone Hacks & Apps
- Convert DVD & Movies to Iphone
- Iphone: Hackers Prime Target in 2008
- Top 15 Iphone Software Games Apps
- Unlock Iphone PwnageTool (Mac OS)
- Unlock Iphone iBricker Windows
- Unlock Iphone AppTapp Windows
- Unlock iPhone ZiPhone 2.5 + 3.0 (Windows)
- Unlock iPhone ZiPhone 2.5 + 3.0 (Mac OS)
- Unlock iPhone iLiberty 1.5 (Mac OS)
- Unlock iPhone iLiberty 1.2 (Windows)
- Unlock iPhone iLiberty 1.2 (Mac OS)





July 25th, 2008 at 5:29 am
[...] HOT Jailbreak 2.0 Guide has just been released. [...]
September 29th, 2008 at 5:01 pm
[...] 1) WinPwn 2.0 IS 2.0.0.1 : Jailbreaks your 2.0 iPhone/iPod Touch/iPhone 3G. WinPwn 2.0 – Pwnagetool 2.0 | Unlock Apple Iphone [...]
March 12th, 2009 at 11:34 pm
I followed the directions but all I get is the usb side of the cable showing an arrow to a disk with a music symbol on the front of the screen. Can I get some help?